B2C

•60 x 40 cm in size •Pack contains 1 sheet •Has foil within it to create a different and new look •Bright in color •Can be used with décopatch glue, Varnish, Tresors, Patchliner, and more

Décopatch paper adapts perfectly to the shape of all objects (flat or irregular) and on all materials (papier mache, wood, plastic, iron, glass, polystyrene, metal, terracotta, ceramics, cork, etc.). Very easy to apply thanks to the finesse and resistance once stuck. The technique is simple: tear or cut pieces of Décopatch paper about 2 x 2 cm. Apply the PaperPatch adhesive varnish (not included) to the surface to be decorated. Place a sheet of paper on the glued surface and a second layer of icing glue on top of it. Repeat the operation by overlapping the pieces of paper until the object is fully or partially covered. Recommended for children over 5 or adults, beginners or experienced, the Décopatch technique is suitable for all ages and levels!

Multi-surfaces: décopatch paper perfectly matches the shape of all objects (flat or irregular) and on all materials (papier mache, wood, plastic, iron, glass, polystyrene, metal, terracotta, ceramic, cork, etc.). Foil effect: foil printing is a hot foil technique allowing the creation of metallic effects it facilitates the highlighting of certain elements of the drawing and enhances the shine of the paper after gluing, the foil aspect remains unchanged your creations are chic and bright!

Multi-surfaces: décopatch paper perfectly matches the shape of all objects (flat or irregular) and on all materials (papier mache, wood, plastic, iron, glass, polystyrene, metal, terracotta, ceramic, cork, etc.). Foil effect: foil printing is a hot foil technique allowing the creation of metallic effects it facilitates the highlighting of certain elements of the drawing and enhances the shine of the paper after gluing, the foil aspect remains unchanged your creations are chic and bright!

•180 ml pot •UV and water (light showers) resistant •Dries clear •ideal for use on products which are wanting to be placed outside (not in all weathers, light showers only) •leaves a protective coating

•L’apprenant est invité à enrichir son lexique, à mémoriser et à exprimer son opinion à l’écrit. •10 bilans linguistiques et 10 préparations au DELF. •Les transcriptions et les corrigés sont consultables à la fin du cahier. • The learner is invited to enrich his vocabulary, to memorize and to express his opinion in writing. • 10 language assessments and 10 DELF preparations. • Transcriptions and answers are available at the end of the book.

10 cm, 4 pieces, Styrofoam white CFC-free, groundwater-neutral, fully recyclable, food-neutral, dimensionally stable, impact-resistant, and resilient. Emits no harmful substances in the air, water, or soil. in a pouch.

12 cm, 4 pieces, Styrofoam white CFC-free, groundwater-neutral, fully recyclable, food-neutral, dimensionally stable, impact-resistant, and resilient. Emits no harmful substances in the air, water, or soil. in a pouch.

6 cm, 6 pieces, Styrofoam white CFC-free, groundwater-neutral, fully recyclable, food-neutral, dimensionally stable, impact-resistant, and resilient. Emits no harmful substances in the air, water, or soil. in a pouch.

8 cm, 4 pieces, Styrofoam white CFC-free, groundwater-neutral, fully recyclable, food-neutral, dimensionally stable, impact-resistant, and resilient. Emits no harmful substances in the air, water, or soil. in a pouch.

Assorted colors, supply depends on availability. Brunnen Water Cup with Leak Protection and Lid Pack of 1. Made from polyethylene. The practical attachment prevents water from leaking when the cup falls over. Diameter: 8 cm, height: 9 cm. (red, blue, yellow, green)

This craft item made of Styrofoam is created by designing with paint, plaster bandages, concrete, etc. a beautiful decorative item.

These fountain wax crayons visually complement other school materials from the Drago series. The Brunnen wax crayons are wrapped in a paper sleeve with a dragon skin look. This keeps all fingers clean during the first swing exercises and when creating colorful works of art. The case contains eight different fountain wax crayons.

FOUNTAIN 1048841942; crayons Sweet Wild Cat; Length: 10cm; diameter 11mm; yellow, orange, red, green, violet, blue, brown, black

This Ceramic Palette has a nice weighty feel and can be used with watercolor, inks, and dyes. Because it is made from porcelain, it is easy to clean, will not stain and will keep your paints wet for longer than a plastic palette; providing a longer period for wet mixing and allowing you to avoid having to color match to dry hues. Ceramic palettes are very sturdy and designed for years of consistent use.

Aquafine watercolors are manufactured with modern high-quality pigments crushed to perfection to ensure excellent results. Colors are transparent, intense, and easy to apply. They have excellent coloring power and extraordinary technical properties to perform splendid and delicate glazing. Explore our product range.

Water-soluble watercolor inks with a high degree of light resistance and miscibility. Can be used pure or diluted to obtain endless hues. They are formulated with authentic pigments for fine arts, which allows to obtain intense and bright colors. Suitable for technical illustrations and detailed drawings.

Graduate Oil colors are traditionally made with a buttery soft texture and high pigment loads. They offer excellent brush ability and are easy to mix whilst being suitable for smooth brush applications and impastos. The surface dries to a low satin finish and uniform sheen within four to five days.

Daler Rowney's Graduate Oil Colors provide an affordable range ideal for those looking for reliability and color performance. Graduate oil colors are soft, easy to use, blend well with each other, and dry with a low glossy satin glow within 5 days.

Graduate Oil colors are traditionally made with a buttery soft texture and high pigment loads. They offer excellent brush ability and are easy to mix whilst being suitable for smooth brush applications and impastos. The surface dries to a low satin finish and uniform sheen within four to five days.

Daler-Rowney FW Epoxy Resin and Hardener is ideal to use with FW Acrylic Inks and has a max depth of 5mm. Dries with a smooth even colored film. Suitable for use on canvas, wood, and other primed surfaces. Preparation and Mixing. Mix 1 part FW Epoxy Resin with 1 part FW Epoxy Hardener to finalize your 3D art with a shockproof, water-resistant, and UV-protected glossy finish. Due to its flexibility and strength, FW Epoxy is perfect for creating resin art, laminating, or casting load-bearing forms, sculptures, and statues. It can be applied by pouring or brush/roller curing at ambient temperature. It can be used on many surfaces such as canvas, wood, MDF, glass, Perspex, concrete & metal. Self-leveling. The resin self-levels to form a perfectly flat and gloss finish. Equally suitable for indoor and outdoor use once dry. To give plenty of working time to create amazing resin artwork, FW Epoxy is surface dry is touch dry in 6-8 hours at 22°C and will be fully cured in 5-7 days. Once cured, FW Epoxy Resin and Hardener provide a clear art coating resin that won’t shrink or distort over time. Directions. Ideal to use with FW Acrylic Inks. Please be advised, that although the resins are U.V. stabilized, this does not mean they are U.V. proof. Ultimately our FW clear epoxy resin will show signs of U.V. degradation over time. Daler-Rowney FW Epoxy Resin and Epoxy Hardener have a 1-year shelf life. The maximum weight in one pour is 2kg. The optimum working temperature is 22°C. The optimum working time is 25-30 minutes, but it can vary slightly depending on the room temperature. The resin should be poured within a few minutes of mixing. If it is not possible to apply this quickly, mix smaller quantities of epoxy at one time or decant into a flat container that allows a larger surface dissipation area to avoid heat build-up and accelerated curing of the resin. Safe use. To use FW Epoxy Resin safely we recommend the following measures: •Wear nitrile gloves or use a specialist resin barrier cream at all times. •Wear a breathing mask when using heat as a technique to create visual effects. •Wear a breathing mask when sanding partially cured resin. •Work in a well-ventilated room. •Use of safety goggles. •Avoid skin contact. If resin gets on the skin, wash it with plenty of soap and water. •DO NOT eat, drink, or smoke while working. •In case of eye contamination, wash with plenty of water for 15 minutes and consult medical advice immediately.

Daler-Rowney FW Epoxy Resin and Hardener is ideal to use with FW Acrylic Inks and has a max depth of 5mm. Dries with a smooth even colored film. Suitable for use on canvas, wood, and other primed surfaces. Preparation and Mixing. Mix 1 part FW Epoxy Resin with 1 part FW Epoxy Hardener to finalize your 3D art with a shockproof, water-resistant, and UV-protected glossy finish. Due to its flexibility and strength, FW Epoxy is perfect for creating resin art, laminating, or casting load-bearing forms, sculptures, and statues. It can be applied by pouring or brush/roller curing at ambient temperature. It can be used on many surfaces such as canvas, wood, MDF, glass, Perspex, concrete & metal. Self-leveling. The resin self-levels to form a perfectly flat and gloss finish. Equally suitable for indoor and outdoor use once dry. To give plenty of working time to create amazing resin artwork, FW Epoxy is surface dry is touch dry in 6-8 hours at 22°C and will be fully cured in 5-7 days. Once cured, FW Epoxy Resin and Hardener provide a clear art coating resin that won’t shrink or distort over time. Directions. Ideal to use with FW Acrylic Inks. Please be advised, that although the resins are U.V. stabilized, this does not mean they are U.V. proof. Ultimately our FW clear epoxy resin will show signs of U.V. degradation over time. Daler-Rowney FW Epoxy Resin and Epoxy Hardener have a 1-year shelf life. The maximum weight in one pour is 2kg. The optimum working temperature is 22°C. The optimum working time is 25-30 minutes, but it can vary slightly depending on the room temperature. The resin should be poured within a few minutes of mixing. If it is not possible to apply this quickly, mix smaller quantities of epoxy at one time or decant into a flat container that allows a larger surface dissipation area to avoid heat build-up and accelerated curing of the resin. Safe use. To use FW Epoxy Resin safely we recommend the following measures: •Wear nitrile gloves or use a specialist resin barrier cream at all times. •Wear a breathing mask when using heat as a technique to create visual effects. •Wear a breathing mask when sanding partially cured resin. •Work in a well-ventilated room. •Use of safety goggles. •Avoid skin contact. If resin gets on the skin, wash it with plenty of soap and water. •DO NOT eat, drink, or smoke while working. •In case of eye contamination, wash with plenty of water for 15 minutes and consult medical advice immediately.

Ø 12 mm 20 pieces plastic 5 assorted colors (white, yellow, red, blue, green) round black eyelashes on colored eyelid with glue point in a bag with euro perforation

18 x 13 mm 10 pieces plastic white with a black pupil oval bagged with euro perforation

Ø 30 mm 10 pieces plastic white with a black pupil round bagged with euro perforation

10 pieces Ø 3 mm plastic white with a black pupil round bagged with euro perforation

Ø 40 mm 10 pieces plastic white with a black pupil round bagged with euro perforation

9 x 7 mm 10 pieces plastic white with a black pupil oval bagged with euro perforation

Ø 8 - 20 mm 100 pieces multicolored assortment bagged with euro perforation

Ø 8 - 20 mm 100 pieces black bagged with euro perforation

Ø 8 - 20 mm 100 pieces blue bagged with euro perforation

To be used for various threading and embroidery techniques packaging height: 1 cm 30g, imitation pearls, seed beads, tube beads, and sequins plastic light blue in assorted colors in blister packaging with euro perforation

To be used for various threading and embroidery techniques packaging height: 1 cm 30g, imitation pearls, seed beads, tube beads, and sequins plastic turquoise in assorted colors in blister packaging with euro perforation

Plastic. 2000 pieces. pearly bright pink/violet. In a bag with euro perforation. Compose the motifs using special supports. Apply the baking paper and iron on medium heat until the pearls melt. After cooling remove the baking paper.

2000 pieces. Plastic. red/orange/yellow. Insert the design into the special base plate. Lay a sheet of parchment paper on top and melt the beads with an iron turned on to medium heat. Let cool and then remove the parchment paper.

Ø 12 mm 10 pieces plastic white with black pupil round bagged with euro perforation

To be used for various threading and embroidery techniques packaging height: 1 cm 30g, imitation pearls, seed beads, tube beads, and sequins plastic lilac in assorted colors in blister packaging with euro perforation

To be used for various threading and embroidery techniques packaging height: 1 cm packaging Ø 9 cm 30g, imitation pearls, seed beads, tube beads, and sequins plastic bright pink in assorted colors in blister packaging with euro perforation

Ø 8 - 20 mm 100 pieces yellow bagged with euro perforation

Ø 8 - 20 mm 100 pieces red bagged with euro perforation

to be used for various threading and embroidery techniques packaging height: 1 cm 30g, imitation pearls, seed beads, tube beads, and sequins plastic red in assorted colors in blister packaging with euro perforation

To be used for various threading and embroidery techniques. packaging height: 1 cm. packaging Ø 9 cm. 30g, imitation pearls, seed beads, tube beads, sequins, plastic. Silver in assorted colors in blister packaging with euro perforation

For decorations, card design, etc. motif size motif approx. 3 cm, box: 10.5 x 10.5 cm. 45 pieces. Ice Crystals, Ornaments. plywood

A small wooden tray with 20 charming wooden shapes. Four different assorted themed designs. Five of each design included. The average size of each small flower shape is approximately 25mm. The bicycle measures approximately 100mm x 60mm.

2000 pieces. Plastic blue/light blue/green. Insert the design into the special base plate. Lay a sheet of parchment paper on top and melt the beads with an iron turned on to medium heat. Let cool and then remove the parchment paper.

Complete starter set for Melting Bead craft work. Ideal for School classrooms or Hobbyists 4000 beads, 4 small pegged base plates, 1 pair of tweezers, templates & full instructions